|
You
need to construct a small curl vent and cylinder unit not provided
with the model.
This
smaller curl vent is just slightly taller than the center box
vent but shorter than Vent 10 and also faces forward. There
was a cylinder unit between the curl vent and the port side
of the center trunk vent slightly shorter than the trunk vent.
To make this vent:
- Use the
one spare G23 part for the cylinder/motor unit.
- Construct
a curl vent as described in the Curl
Vent section of the Vent Overview and shape the bottom
as seen opposite.
- Glue
onto unit opposite the motor facing forward.
|
