| Type:
|
Sirocco. |
| Fan
Size: |
30". |
| Location: |
Starboard
forward of #2 funnel on deck house roof. |
| Instruction
Step: |
17. |
| Part
No: |
G25
& H19. |
| Bob
Read Vent Number: |
22. |
| Reference:
|
- Page 244 of Titanic and Her Sisters Olympic and Britannic
- Ken Marschall's cutaway painting on page 50 of Titanic An
Illustrated History.
|
|
Click
to enlarge image.
|
Photo
of Webmaster's model in progress.
|
| Description: |
This
vent is incorrectly orientated and is in the wrong location.
The cowl part of the vent sat on the aft side of the motor
housing not forward.
To
correct this.
-
Modify motor unit in preparation for gluing on the cowl
vent as described in the Motor
Unit section of the Vent Overview.
- Cut
of existing duct opposite motor unit and add a short
circular duct as described in the Duct
section of the Vent Overview.
-
-
Modify
the cowl vent as described in the Cowl
Vent section of the Vent Overview and glue onto
the motor unit facing aft.
- Locate
the vent further aft than the deck marking (i.e.. closer
towards the front of #2 funnel) so it sits behind the
aft edge of the roof line of the Grand Staircase.
- Glue
into position making sure that the motor faces starboard.
- Note:
Bob Read mentions that the starboard cowl vent was larger
than its Port counterpart as can be seen in H19 needs an extension
added and a wider opening.
- Note:
The part is listed correctly as G25 in the instructions
but the artist has drawn a G33
|
Note:
All instruction step numbers in () denote the instruction step for
the rereleased Mincraft model.
