| Type:
|
Sirocco. |
| Fan
Size: |
20". |
| Location: |
Center,
stern end of 1st class Smoking room roof near the 2nd class entrance/elevator
building. |
| Instruction
Step: |
23 |
| Part
No: |
G25
& H 19 |
| Bob
Read Vent Number: |
75. |
| Reference:
|
- Page 244 of Titanic Triumph and Tragedy show the top of
the cowl.
- See Ken Marschall's cutaway painting on page 49 of Titanic
An Illustrated History.
|
|
Click
to enlarge image.
|
Photo
of Webmaster's model in progress.
|
| Description: |
The
kit has the motor facing to port where a Ken Marschall
painting shows the motor facing the bow.
To correct
this.
- Modify
motor unit in preparation for gluing on the cowl vent as described
in the Motor Unit
section of the Vent Overview.
- Square
off the ducting using a file.
- Modify
the cowl vent as described in the Cowl
Vent section of the Vent Overview and glue onto the motor
unit facing aft.
- Rotate
the unit so that the motor is facing forward and glue into
position.
|
Note:
All instruction step numbers in () denote the instruction step for
the rereleased Mincraft model.
