|
This
vent is not included in the kit.
Add
a tall cowl vent and motor unit in this location.
What
you need to build is a G25/H19 combo with the motor facing
in one of the following directions. As Bob has done the
most detailed research in this area we would suggest going
with option 1.
- Scratch
build a left handed motor unit as described in the Motor
Unit section of the Vent Overview. Make it slightly
smaller than the others you have built.
- Scratch
build a cowl vent as described in the Cowl
Vent section of the Vent Overview.
- Glue
the cowl vent on to the motor unit facing aft.
- There
are currently three opinions on the orientation of the
motor (see below).
Option
1.
According
to Bob's latest research the motor housing faces forward. As
seen above.
Option
2.
According
to James Cameron's `Titanic', the motor housing faced to the
port side of the ship. See any stills from the film that show
this area.
Option
3.
Bruce
Beveridge has researched another configuration with the motor
facing to the stern and the fan housing sticks out from the
port side of the cowls column.
Modeler's
choice.
|
