| Type:
|
Sirocco. |
| Fan
Size: |
20". |
| Location: |
Port,
underneath the crane on the Poop Deck, behind the stairs from the aft
well deck to the Poop Deck. |
| Instruction
Step: |
6 |
| Part
No: |
Scratch
build. |
| Bob
Read Vent Number: |
87. |
| Reference:
|
- See page 60 of Titanic Triumph and Tragedy for a rough reference.
- See page 23 of Leo Marriott's 'Titanic' for the Olympic's
version of this vent.
|
|
Click
to enlarge image.
|
Photo
of Webmaster's model in progress.
|
| Description: |
This
vent is similar to those seen on the bottom of the cowl
vents but with a vertical vent pipe instead. The motor
faced towards the bow of the ship and the pipe sat on
the inboard side of the motor housing. In other words
looking aft from the aft well deck the vertical vent is
on the LEFT side of the motor housing
To
build this vent:
- Build
a left handed motor unit as described in the Motor
Unit section of the Vent Overview.
- Build
a rectangular duct and glue it opposite to the motor unit.
- Glue
two lengths of 0.40 x 0.40 Evergreen strip side by side.
- Glue
onto the top of the motor unit and allow to set.
- Cut the
duct to the height of the underside of the Poop deck.
- Glue
into place on the starboard side of the Poop Deck overhang
with the motor facing forward.
|
Note:
All instruction step numbers in () denote the instruction step for
the rereleased Mincraft model.
